Lab QC EQUIPMENTS

1.CO2 ANALYSER

Geotech Co2/O2 Analyser
This CO2 analyser is specifically designed to monitor CO2 for the verification of incubators in IVF laboratory. This unit has been developed to incorporate the latest technology and specification requirements, and provides the user with a fast, simple to use and accurate piece of laboratory kit. Geotech's G100 is a portable analyser designed to monitor CO2 and O2 for the verification of incubators

Key Specifications
Improved accuracy on CO2 readings
Optional dual temperature probe (0-50 degrees C); humidity sensor (0-100%)
Dual temperature probes help you to adjust the temperature to stabilise conditions within your incubator and helps you analyse temperature variation
Rapid response- reading in under 1 minute

2.DIGITAL THERMOMETER

Brand: Greisinger (GMH 3211)
The GMH3211 thermometer with interchangeable thermocouple probes, robust case offering IP65 protection, measures temperature over the range of -220 to 1750°C with a 0.1°C resolution over the entire range. Each GMH3211 incorporates an easy to read, custom 4-digit LCD display with auto off function, open circuit, low battery, hold, max/min and correction functions.

The thermometer with thermocouple type J, K, N, T,N or E with high accuracy ±0.5°C, 0.1°C or 1°C resolution over the full range. An additional feature allows the user to adjust the reading to offset any probe errors, correcting any inaccuracies of the thermocouple probe.

3.VOC MONITOR

MODEL:- Q-SENSE

•     TVOC     ( 0 - 50 PPM) Total Volatile Organic Compounds

•     Ideal     for measuring Indoor Air Quality

•     Loud     60dB configurable alarm

•     3+     Hours of battery backup for portability

•     Micro     Sized: 65x65x35 mm for easy carrying

•     Blue     backlight OLED for Easy readability and less strain on eyes

•     User     friendly navigation using only a single button

4.PH METER (THERMO & HANNA)

Orion Lab Star PH111 Bench pH Meters Model:LSTAR1110

Measure pH with mV and temperature using the Orion Lab Star PH111 pH/mV meter. This pH meter is ideal for simplified, budget-friendly lab testing.

•     Budget-friendly     pH meter for simplified pH testing

•     Display     shows pH, mV and temperature simultaneously for accurate data     recording

•     Measure     -2.000 to 18.000 pH, -2000.0 to +2000.0 mV and -5.0 to 105.0 °C or     23.0 to 221.0 °F to ensure comprehensive measurement capabilities

•     Perform     one-to-five-point pH calibrations for proficient SOP compliance

•     Large     5-inch backlit display makes viewing and recording measurements easy

•     Small     meter footprint saves valuable bench space in your lab

•     Onscreen     stabilizing and ready indicators help identify when readings are     complete

•     pH     electrode condition icon helps ensure reliable electrode performance

HANNA HALO – Model: HI10832

Our HALO® Wireless pH Meter with Micro bulb has a bulb tip that is only 3 mm in diameter and can be used to measure pH in samples as little as 100 µL. This meter is ideal for 96 well plates, microcentrifuge tubes, and for expensive samples that offer little volume to work with. All readings are transmitted directly to your Apple or Android device. Easily connect to the Hanna Lab App at the press of a button via Bluetooth wireless technology. The HALOs CR2032 lithium ion battery is easily replaceable and lasts for approximately 500 hours.